Detect at the source
Place sensors near water heaters, sinks, pumps, laundry, basements, and vulnerable pipes.
A leak alert tells you. A shutoff automation buys you time.
Water Leak Detector Alerts With Automatic Water Shutoff
Start with a sensor that warns you. Add a plumber-installed motorized valve when you want the property to stop the water before you can get there.
No credit card · One free protection setup · Add more when ready
9:41● ● ●
◒ CHIRP ALERTS
CRITICAL ALERTLeak detectedThe main water valve was closed automatically. Check the utility room.
Lake House · SampleAcknowledgeExample alertWhy it matters
A remote water leak detector should do more than beep
At a distant or empty property, every minute between detection and shutoff can increase damage. A phone alert matters—but it still leaves you searching for someone who can reach the main valve.
Close the main line
Have a plumber install a CHIRP-controllable motorized shutoff where it can protect the property.
Escalate failure
If the valve is offline or does not confirm, send a separate urgent alert.
From alert to outcome
Turn water leak detection into a verified response
When the sensor finds water, CHIRP can tell the main valve to close, check whether the valve reports closed, and send a critical phone alert that explains whether the action succeeded.
Explore the CHIRP platformCHIRPLake House
Live dataProperty statusWater shut off automatically
ActiveLeak sensorWet
Main waterValve closed
Remote control depends on the device you chooseExample home · CHIRP dashboard preview
A property that responds
How automatic water shutoff works after a leak
CHIRP notices the change, follows the response you approved, and shows you what happened.
SensorWater is detected
CHIRP responseCHIRP starts your saved response
Alert or actionThe water valve closes
Result on your phoneYour phone shows the result
AI home automation assistant
You explain the problem. CHIRP helps set up the protection.
Describe the property problem in everyday language—even if you have not bought a sensor yet. CHIRP can recommend what to buy, check whether a specific model will work, guide the setup, and prepare the response for your approval.
Recommend devicesCheck compatibilitySet up protectionTest before activation
CHIRP AssistantNew chat
Ready for your reviewReview automation
Ask CHIRP what you want to protect… ↑
What this means for you
Start with an alert. Add automatic shutoff when you are ready.
A leak sensor can warn you on its own. Add a motorized valve when you want CHIRP to close the water automatically and tell you whether it worked.
Automatic shutoff can reduce exposure but cannot guarantee prevention of water damage. Plumbing work should be performed by a qualified professional.
Keep exploring
Build the remote property system around your risks
Questions, answered
Water Leak Detector Alerts With Automatic Water Shutoff FAQ
Do I need a shutoff valve to use a leak sensor?
No. Start with alert-only detection. Add a controllable valve later if you want an automatic response.
What if the valve does not close?
CHIRP can send a critical alert so you know the property still needs immediate attention.
Your first protection can be free
Try a leak sensor and shutoff valve free
Start with two devices, one protection setup, and one clear property view. No credit card required.